Trusted across Cambridge since 1987

  • Family-run
  • Fully Guaranteed
Opening Time: 7 days

Call Us : 01223242308

Get a Free Quote
5-Star Rated Service

Roofline Systems in Cambridge

01223 242308 Or Request A Callback
10

Years Guarantee

5 Star

Customer Ratings

2,852+

Projects Completed

100%

Fully Insured

Roofline is the fascia, soffit, bargeboard, guttering, downpipe, and dry verge system running along the edge of your roof. Together, these components protect roof timbers from damp, manage rainwater, support roof ventilation, and give your home a neat, finished edge. Left unrepaired, a damaged roofline leads to rot, leaks, condensation, and sagging guttering that can spread into the wider roof structure.

Area Cladding has supplied and installed uPVC roofline across Cambridge and the surrounding villages for over 38 years. We're a fully insured local installer offering low-maintenance boards in a wide choice of colours and styles, fitted to match your property.
Image
38+

Years Experience

Our Roofline Services

Area Cladding provides a complete range of roofline services throughout Cambridge and Cambridgeshire, covering every component along your roof edge. Whether you need a single repair or a full roofline replacement, our team works as your local installer, supplier, and fitter for fascias, soffits, bargeboards, guttering, downpipes, and dry verge systems, all fitted as one connected system to enhance your home's exterior.

Fascias and Soffits

The fascia is the board along your roof's lower edge, fixed to the rafter ends, supporting roof tiles and holding the guttering in place. The soffit sits beneath it, closing the gap to the wall. Soffits come in solid, vented, and hollow styles depending on ventilation needs. Fascia profiles include square-line, ogee, and bullnose, each suited to different property styles.

PVCu Bargeboards

Bargeboards protect a gable roof edge the way fascias protect the eaves, covering exposed rafter ends and completing the roofline on sloped sections. On Cambridge terraces and semis, bargeboards are highly visible from the street, so matching their colour and profile to the fascia supports kerb appeal. PVCu bargeboards resist rot, need no repainting, and match your fascia and soffit colours.

Guttering and Downpipes

Guttering collects rainwater from the roof and channels it into the downpipes, carrying it to ground level and into the drainage system. Undersized guttering is a common problem; a gutter sized for light rain can overflow in heavy downpours, causing damp patches homeowners struggle to explain. We size new guttering and fascias, along with downpipes and roof uprights, to match your roof's drainage needs during every survey.

Dry Verge Systems

A verge is where roof tiles meet the gable wall on a sloped roof edge. Traditionally sealed with mortar, this wet verge cracks over time and needs repointing to stay watertight. A dry verge replaces mortar with a mechanically fixed uPVC or GRP capping that clips over the tile edge, resisting wind uplift without repointing a real advantage across Cambridgeshire's exposed, open village settings.

Customer Reviews

4.6 (22 reviews)
S
Stuart Tresadern
Jun 24, 2026
Google

Contacted George and he came to visit and recieved his qoute very quickly - I have had several jobs completed by area cladding and the workmanship has been exemplary- with windows - cladding and conservatory improvements- cant fault George and his team and i definitely recommended his work and competitive pricing . Thanks for all the work completed .
An Gooch
An Gooch
Mar 09, 2026
Google

Area Cladding round last week to replace 2 door locks. Very friendly and efficient. Great job I chose them because I have had 2 houses of windows replaced over the years and wouldn’t choose anyone else.
Julie Stopher
Julie Stopher
Jan 26, 2026
Google

I have used Area Cladding Ltd many times in the past for the fitting of windows, doors and external cladding. This time it was two bedroom windows and, once again, George and his team did a brilliant job. The work was done in an efficient and thorough way and my rooms were left exactly as they had been found. I would highly recommend Area Cladding Ltd for this type of work.
Andrew Tester
Andrew Tester
Jan 23, 2026
Google

Area cladding are a 5 star company. We have had a conservatory built by them and they provided a wonderful service. My parents also had windows and doors provided by them 30 years ago and they are still in great condition. Recently my mum had a problem with the lock on the door and they came within a few hours and fixed it. Area cladding are a top company and i give them the highest recommendation.
Nelly
Nelly
Jul 27, 2025
Google

Absolutely thrilled with the double glazing windows installed! The team was efficient, fast, and a real pleasure to have around - super pleasant, professional, and even a bit of fun. The windows look fantastic and have already caught the attention of several neighbours asking who did them and if they can get a quote too! It’s clear these guys know what they’re doing. Highly recommend - great work and great people.
Philippa Badcock
Philippa Badcock
Jun 12, 2025
Google

Highly recommend Area Cladding! We used them for windows, doors, cladding, fascias/soffits and guttering in March 2025 on recommendation from family and now pass that recommendation on as they are fantastic! They work hard, to high standards, are clean and tidy, competitively priced and a joy to have around, but what we also appreciate, is their knowledge, experience and network, as they have provided us with great support and advice and also contacts for other work we are looking to have done - thank you George, Jack and Jordan and we look forward to having you back again in the future for more home improvements!
Read More Reviews

uPVC vs Composite vs Timber Roofline

Choosing between uPVC, composite, and timber roofline comes down to lifespan, upkeep, and how closely you need to match a period property's original detailing.
uPVC Composite Timber
Typical lifespan 25+ years 25+ years 15–20 years with maintenance
Maintenance Occasional wash down Occasional wash down Repainting every 3–5 years
Upfront cost Lowest Mid to higher Lowest material cost, higher lifetime cost
Appearance longevity Colour holds well, foil finishes available for woodgrain effect Closest match to real timber grain Authentic but fades and needs repainting to stay presentable
Best suited to Most properties, especially where low maintenance is the priority Period properties wanting a timber look without the upkeep Listed buildings or conservation areas requiring genuine timber
uPVC roofline is made from a foamed core with a rigid outer skin, which gives the board its stiffness without excess weight; this construction is why a well-made uPVC fascia doesn't sag or warp the way a thinner board can over time. For a Victorian terrace where the original roof fascia board was timber, a woodgrain foil finish or an ogee profile keeps the proportions close to the original without a repainting cycle. For a 1930s semi or new build, a square-line white or anthracite grey upvc roofline finish is usually the closer match to what's already on the street.

Cladding Materials for Roofline and Walls

Roofline replacement is often carried out alongside cladding work on gable ends, dormers, or full wall elevations, particularly where existing render or timber is failing at the same time as the roofline. These are the main cladding materials we install:

Hardie plank (cement fibre): A fibre-cement board that copies the look of timber weatherboard. It resists rot, holds paint well, and carries a strong fire rating for gable ends and extensions.

Cement board: A flatter-profile fibre-cement panel used where a modern, uniform finish is wanted rather than a timber-effect plank, suited to contemporary elevations.

Composite panel: A blend of wood fibre and polymer that gives the look of timber decking or cladding without the movement, splitting, or repainting solid timber needs.

Corrugated sheet: A ribbed metal or composite roofing and wall sheet, commonly used on garages, outbuildings, extensions, and porch roofs rather than the main house roof.

Polycarbonate: A lightweight, light-transmitting sheet material used for porch roofs and small canopy roofs, where daylight matters more than full opacity.

Timber replacement boards remain an option where a conservation area requires a like-for-like appearance, though they need repainting on a cycle; uPVC and composite alternatives don't. As a Cladco roofing stockist, we also supply composite roof panels and panel roof systems, along with PVC porch roof builds and polycarbonate roof installation for canopies and porches.

Signs You Need Roofline Replacement

Watch for these warning signs on your fascia, soffit, guttering, and verge before damage spreads further into the roof structure.
Peeling or blistering paint on timber fascias signals the wood underneath has started absorbing moisture and needs attention soon.
Sagging or pulling-away guttering is often caused by a failing fascia board behind it, not the gutter itself.
Water staining below the guttering usually points to an overflow, blocked run, or joint fault rather than a broken gutter.
Soft or spongy fascia boards when pressed mean the timber has already begun rotting internally, even if the paint looks intact.
Cracked or missing mortar at the verge is an early sign a wet verge needs attention before water gets behind the tiles.
Birds or pests nesting behind the soffit usually means a gap has opened where the soffit meets the fascia or wall.
Image
Fully Insured
For complete peace of mind
Not every one of these needs a full replacement. A single damaged length of guttering or one cracked verge section can often be repaired. Full replacement becomes the better option once the timber structure itself is affected, once colours and profiles no longer match across a terrace after patch repairs, or once ongoing repainting costs on timber roofline start to outweigh a one-time uPVC or composite installation.

Our Roofline Replacement Process

Every roofline replacement follows the same five stages, whether we're fitting new guttering and fascias or a complete system.

1. Survey:

We check the condition of your existing fascia, soffit, guttering, and verge, measure roof area, and confirm access requirements.

2. Strip-out:

Old boards and guttering are removed, and the timber structure behind them is inspected for rot before refitting.

3. Fitting:

New fascia, soffit, bargeboard, and guttering are fixed in place, with gutter fall and outlets set to match drainage needs.

4. Sealing and ventilation checks:

Joints are sealed, and soffit ventilation is checked to confirm air can move through the roof void as intended.

5. Water flow test and sign-off:

Guttering is tested to confirm it drains correctly along its full run before the job is signed off.

What Affects the Cost of Roofline Replacement

Several factors shape a roofline quote, which is why we price after a survey rather than over the phone.

Property size and number of storeys: More roof edge length and higher access both add time and scaffold cost to the job.

Extent of existing timber rot: If rafter ends need repair along with the visible boards, that adds work found during strip-out.

Access: A terrace with a shared side return is quicker to access than a detached home needing scaffold on all sides.

Material choice: uPVC typically costs the least upfront, composite sits above it, and genuine timber costs the most over its lifetime with repainting.

Number of gutter profiles and downpipes needed: A property with multiple roof sections or valleys needs more guttering and outlets than a single-span roof.

We give a fixed quote after survey rather than an estimate over the phone, since board condition and access can only be confirmed by seeing the roof.
View Our Work Get a Free Quote
Professional contractor seals window frame showing reasons to choose us for home improvement service
38+

Years Experience

Roofline for Cambridge's Period and Conservation Area Properties

Large parts of central Cambridge, along with many South Cambridgeshire villages, sit within conservation areas, and some properties are listed. This can affect roofline replacement in two ways: the council may require like-for-like materials and colours rather than a change in appearance, and in some cases planning permission is needed rather than the work falling under permitted development rights. Painted timber fascias on a Victorian terrace, for example, may need to be replaced in a matching profile and colour rather than switched to a different style, even where the material itself (uPVC instead of timber) is acceptable.

We check conservation area and listed status as part of the survey and advise on what's achievable before you commit to a specification, rather than after materials have been ordered, giving you Cambridgeshire uPVC rooflines that stay within the rules from the start.

Areas We Cover Across Cambridge and Beyond

North London

West London

Ilford

Twickenham

Hertfordshire

Berkshire

East Sussex

Cambridgeshire

Essex

Soham

Histon

Willingham

Swavesey

St Ives

Cambourne

Burwell

Bottisham

Haverhill

South London

Central London

Enfield

Kingston upon Thames

Uxbridge

Middlesex

Surrey

Suffolk

Newmarket

Mildenhall

Cottenham

Over

Bar Hill

St Neots

Papworth

Linton

We take pride in delivering durable, great-looking results with honest pricing and outstanding service.

View All Areas 01223 242308
Image
Image

Get Your Free Roofline Quote

If your fascias, soffits, guttering, bargeboards, or verge are showing any of the signs above, book a survey, and we'll give you a fixed quote based on your property, not a phone estimate. We'll also confirm the guarantee in writing and flag anything relevant to conservation area or listed status before any work is agreed.
Get a Free Quote 01223 242308

Frequently Asked Questions

A roofline is the outer edge where a building's roof meets its exterior walls, forming the visual silhouette of a roof from the street. In construction and home improvement, this term covers the protective boards, gutters, and hardware installed along this lower edge. Fascia boards, soffits, guttering, and bargeboards work together at this junction to create a durable, finished appearance.

The fascia is the vertical board fixed to the rafter ends, carrying the guttering and closing the roof edge. The soffit is the flat board underneath it, closing the gap to the wall and providing ventilation into the roof void.

A dry verge is a mechanically fixed capping that seals the roof edge where tiles meet a gable wall, replacing the traditional mortar (wet) verge. It doesn't need repointing and gives more consistent resistance to wind uplift.

uPVC with a woodgrain foil finish and an ogee profile suits most Victorian and Edwardian terraces well and costs less upfront. Composite gives a closer match to real timber grain if appearance matters more than budget. Genuine timber is only usually required where a conservation area specifically calls for it.

Vented soffits have strip or circular vents that let air move through the roof void, reducing condensation risk. Solid soffits have no ventilation and are used where the roof is ventilated another way.

It depends on the property and the change being made. Listed buildings usually need consent for any material change, while conservation area properties may fall under permitted development if the replacement is like-for-like. We check this during survey.

Check for soft or spongy timber when pressed, paint that's peeling or blistering, and guttering that's pulling away from the board. If the timber structure itself is affected, or damage covers more than a short section, replacement is usually more cost-effective than ongoing repair.

This is often a sizing or fall problem rather than a blockage; a gutter profile too small for the roof area, or incorrect fall along the run, both cause overflow even when the gutter is completely clear.

Most single-property roofline replacements are completed within one to two days, depending on property size, access, and the extent of any timber repair found during strip-out.

Yes, we use the same colour ranges across fascia, soffit, bargeboard, and guttering, so a full replacement can be matched consistently across every visible surface, including where it needs to sit alongside an unreplaced neighbouring property for now.